MUTAPHI “M”pH+ Increases the PH
The pH values in freshwater aquariums are between 6.5 and 7.0 and in seawater aquariums they are between 8.1 and 8.4. The decrease or increase of these values is very dangerous for fish. MUTAPHI “M”pH+ is a solution that increases the pH to the desired value. Use and dose: check the pH value of the water (for example, with PRODACTEST pH SWEET or PRODACTEST pH MARINO from PRODAC), if it is lower than the limits indicated above, pour 3ml of MUTAPHI “M” pH+ directly into the aquarium every 20 liters of water. After approximately 2 hours check the pH, if the increase in the value is not sufficient, add another 3ml of MUTAPHI”M” pH+ every 20 liters of water and check again after approximately 2 hours. Repeat this operation until the desired value is reached. Attention: it is important that the pH balance in the aquarium occurs gradually and slowly, sudden changes in value are harmful to fish. It is advisable to keep the product in a cool, dry place, away from light and out of the reach of children.